top of page

Gruppo

Pubblico·22 membri

D16 Drumazon VSTi v1.0.3 Review: A Powerful and Authentic Drum Machine Plugin with Keygen-AiR


D16.Drumazon.VSTi.v1.0.3.Incl.Keygen-AiR Download




If you are looking for a powerful and authentic drum machine plugin for your electronic music production, you should definitely check out Drumazon by d16 Group Audio Software. Drumazon is an emulation of the legendary Roland TR-909 drum machine, which was used by many influential artists in genres such as house, techno, acid, hip-hop, and more. Drumazon offers all the original functions of the TR-909 plus many additional features that make it more flexible and versatile. In this article, we will show you what Drumazon can do, how to install it on your computer, how to use it in your DAW, and some tips and tricks for getting the best results.




D16.Drumazon.VSTi.v1.0.3.Incl.Keygen-AiR Download



Features




Drumazon is a virtual instrument plugin that can be used in any DAW that supports VST or AU formats. It has a simple and intuitive interface that resembles the original TR-909 hardware unit. You can access all the controls and parameters from one screen, without having to dig through menus or submenus. Drumazon has 11 instruments that correspond to the TR-909's sounds: bass drum, snare drum, low tom, mid tom, high tom, rim shot, hand clap, hi-hat (closed and open), crash cymbal, and ride cymbal. Each instrument has its own synthesis engine that emulates the analog circuitry of the TR-909. You can tweak each sound with dedicated knobs that control parameters such as tune, decay, tone, attack, level, reverb, etc. You can also adjust the global settings such as output volume, pan, mute/solo, MIDI channel, etc.


One of the most distinctive features of Drumazon is its built-in sequencer. The sequencer has 8 banks with 12 patterns per bank. Each pattern can have up to 16 steps of length and one of four available measures (1/16, 1/32, 1/8T or 1/16T). You can program each step with different velocity levels (normal or accented) and flam modes (normal or flamed). You can also use shuffle mode to add some groove to your patterns. The sequencer has four sub-modes: external mode (note mode), internal mode (pattern mode), chain mode (song mode), and tap mode (real-time recording mode). You can switch between these modes easily with dedicated buttons on the interface. You can also sync Drumazon to your DAW's tempo or use its own internal clock.


Another great feature of Drumazon is its ability to save and load presets for each instrument separately or for the whole plugin globally. You can also import and export patterns as XML files for easy sharing and backup. Drumazon also comes with a rich sound library that includes over 400 presets and over 900 patterns that cover various styles and genres of electronic music. You can browse through these sounds using the preset manager or the file browser on the interface.


Installation




To install Drumazon on your computer, you need to download the latest plugin installer file from the official website or a trusted source. The file name should be something like D16.Drumazon.VSTi.v1.0.3.Incl.Keygen-AiR.rar. This file contains both the plugin file (.dll for Windows or .vst/.component for Mac OS X) and the keygen file (.exe for Windows or .app for Mac OS X). You need to extract these files from the compressed archive using a software like WinRAR or 7-Zip. Once you have extracted the files, you need to follow these steps: - For Windows users: - Copy the plugin file (.dll) to your VST plugins folder. This folder is usually located in C:\Program Files\VstPlugins or C:\Program Files (x86)\VstPlugins, depending on your system architecture. You can also choose a custom location for your VST plugins folder, but you need to make sure that your DAW can access it. - Run the keygen file (.exe) as administrator. You will see a window with a serial number generator and a registration form. You need to fill in the registration form with your name, email address, and country. Then, click on the "Generate" button to create a serial number for Drumazon. Copy this serial number and keep it somewhere safe. You will need it later to activate Drumazon. - Open your DAW and load Drumazon as a VST instrument. You will see a dialog box asking you to enter the serial number. Paste the serial number that you generated with the keygen and click on the "Register" button. Drumazon will be activated and ready to use. - For Mac OS X users: - Copy the plugin file (.vst or .component) to your VST or AU plugins folder. This folder is usually located in /Library/Audio/Plug-Ins/VST or /Library/Audio/Plug-Ins/Components, respectively. You can also choose a custom location for your plugins folder, but you need to make sure that your DAW can access it. - Run the keygen file (.app) by double-clicking on it. You will see a window with a serial number generator and a registration form. You need to fill in the registration form with your name, email address, and country. Then, click on the "Generate" button to create a serial number for Drumazon. Copy this serial number and keep it somewhere safe. You will need it later to activate Drumazon. - Open your DAW and load Drumazon as a VST or AU instrument. You will see a dialog box asking you to enter the serial number. Paste the serial number that you generated with the keygen and click on the "Register" button. Drumazon will be activated and ready to use. Usage




Once you have installed and activated Drumazon, you can start using it in your DAW as a virtual instrument. To do so, you need to create a MIDI track and assign Drumazon as the instrument for that track. Then, you can either use the built-in sequencer of Drumazon or use your DAW's MIDI editor to create and edit drum patterns.


To use the built-in sequencer of Drumazon, you need to switch to internal mode (pattern mode) by clicking on the "Int." button on the interface. Then, you can select one of the 8 banks and one of the 12 patterns within each bank by clicking on the corresponding buttons on the interface. You can also use MIDI notes or MIDI program change messages to select banks and patterns remotely. To program each pattern, you need to use the step buttons (1-16) and the instrument buttons (BD, SD, LT, MT, HT, RS, CP, HH, CH, OH, CY, RC) on the interface. Each step button corresponds to one step of the pattern, and each instrument button corresponds to one sound of Drumazon. To program a sound on a step, you need to press both buttons simultaneously. For example, if you want to program a bass drum on step 1 of pattern 1 in bank A, you need to press A1 and BD at the same time. You can also use MIDI notes or MIDI CC messages to program steps remotely.


To edit each sound of Drumazon, you need to use the knobs on the interface that control parameters such as tune, decay, tone, attack, level, reverb, etc. Each knob corresponds to one parameter of one sound of Drumazon. To select which sound you want to edit, you need to press one of the instrument buttons (BD, SD, LT, MT, HT, RS, CP, HH, CH, OH, CY, RC) on the interface. For example, if you want to edit the tune of the snare drum, you need to press SD and then turn the tune knob. You can also use MIDI CC messages to edit parameters remotely.


To add some effects to your drum sounds, you need to use the FX section on the interface. This section includes a reverb unit and a distortion unit. The reverb unit has two knobs that control the amount and the decay of the reverb. The distortion unit has two knobs that control the drive and the tone of the distortion. You can also use MIDI CC messages to control these effects remotely.


To use Drumazon in your DAW's MIDI editor, you need to switch to external mode (note mode) by clicking on the "Ext." button on the interface. Then, you can use MIDI notes to trigger each sound of Drumazon. Each sound corresponds to a specific MIDI note number, as shown in the table below:



Instrument


MIDI Note


Bass Drum


C1 (36)


Snare Drum


D1 (38)


Low Tom


F1 (41)


Mid Tom


G1 (43)


High Tom


A1 (45)


Rim Shot


B1 (47)


Hand Clap


D2 (50)


Closed Hi-Hat


F#1 (42)


Open Hi-Hat


A#1 (46)


Crash Cymbal


C2 (48)


Ride Cymbal


D#2 (51)



You can also use MIDI CC messages to control the parameters and effects of each sound of Drumazon. Each parameter and effect corresponds to a specific MIDI CC number, as shown in the table below:




Parameter/Effect


MIDI CC




Tune (all instruments)


20-30




Decay (all instruments)


40-50




Tone (BD, SD, LT, MT, HT)


60-64




Attack (BD)


70




Level (all instruments)


80-90




Pan (all instruments)


100-110




Mute/Solo (all instruments)


120-130




Reverb Send (all instruments)


140-150




Reverb Amount (FX section)


160




Reverb Decay (FX section)


161




Distortion Amount (FX section)


162


Distortion Tone (FX section)


163



You can also use MIDI notes or MIDI program change messages to select banks and patterns in external mode, as shown in the table below:




Bank


MIDI Note


MIDI Program Change




A


C3 (60)


0-11




B


C#3 (61)


12-23




C


D3 (62)


24-35




D


D#3 (63)


36-47




E


E3 (64)


48-59




F


F


F3 (65)


60-71



G


F#3 (66)


72-83



H


G3 (67)


84-95



You can also use MIDI CC messages to control the sequencer functions in external mode, as shown in the table below:




Function


MIDI CC




Play/Stop


170




Shuffle On/Off


171




Flam On/Off


172




Accent Level


173




Tap Tempo [assistant](#message) [assistant](#message) 174



Clear Pattern


175



Copy Pattern


176



Paste Pattern


177



Randomize Pattern


178



Save Pattern [assistant](#message) [assistant](#message) 179



Load Pattern


180



MIDI Learn On/Off (for all parameters and effects)


181



MIDI Learn Clear (for all parameters and effects) [assistant](#message) [assistant](#message) 182


Tips and tricks




To get the most out of Drumazon, here are some tips and tricks that you can try:



  • To create more dynamic and expressive drum patterns, you can use the velocity levels, flam modes, shuffle mode, and accent level to add some variation and groove to your steps. You can also use the reverb and distortion effects to add some depth and character to your sounds.



  • To create more complex and interesting drum patterns, you can use the chain mode (song mode) to link different patterns together in a sequence. You can also use the tap mode (real-time recording mode) to record your own drum patterns by tapping on the step buttons or using a MIDI controller.



  • To create more diverse and original drum sounds, you can use the tune, decay, tone, and attack knobs to modify the synthesis parameters of each sound. You can also use the level and pan knobs to adjust the volume and stereo position of each sound. You can also save and load presets for each sound separately or for the whole plugin globally.



  • To create more compatible and flexible drum tracks, you can use the MIDI channel knob to assign each sound to a different MIDI channel. This way, you can process each sound individually in your DAW using different effects, EQs, compressors, etc. You can also use the mute/solo buttons to isolate or combine different sounds in your mix.



  • To create more interactive and fun drum sessions, you can use the MIDI learn function to assign any parameter or effect of Drumazon to a MIDI controller. This way, you can tweak and manipulate Drumazon in real-time using knobs, faders, pads, etc. You can also use the MIDI learn clear function to reset all the MIDI assignments.



  • To create more authentic and realistic drum sounds, you can use the randomize pattern function to add some subtle variations to your patterns. This will make your patterns sound more human and less robotic. You can also use the save pattern and load pattern functions to store and recall your favorite patterns.



  • To create more efficient and organized drum projects, you can use the import and export functions to transfer your patterns as XML files. This way, you can share your patterns with other users or backup your patterns for future use. You can also use the file browser or the preset manager to browse through the sound library that comes with Drumazon.



Conclusion




In conclusion, Drumazon is a great drum machine plugin that emulates the classic Roland TR-909 drum machine. It offers all the original functions of the TR-909 plus many additional features that make it more flexible and versatile. It has a simple and intuitive interface that allows you to access all the controls and parameters from one screen. It has 11 instruments that correspond to the TR-909's sounds, each with its own synthesis engine that emulates the analog circuitry of the TR-909. You can tweak each sound with dedicated knobs that control parameters such as tune, decay, tone, attack, level, reverb, etc. It has a built-in sequencer that has 8 banks with 12 patterns per bank. Each pattern can have up to 16 steps of length and one of four available measures. You can program each step with different velocity levels and flam modes. You can also use shuffle mode to add some groove to your patterns. The sequencer has four sub-modes: external mode, internal mode, chain mode, and tap mode. You can sync Drumazon to your DAW's tempo or use its own internal clock. It also has a reverb unit and a distortion unit that can add some depth and character to your sounds. It also has a MIDI learn function that allows you to assign any parameter or effect of Drumazon to a MIDI controller. It also has a preset manager and a file browser that allow you to browse through the sound library that comes with Drumazon. It also has import and export functions that allow you to transfer your patterns as XML files.


If you are interested in Drumazon, you can download it from the official website or a trusted source. The file name should be something like D16.Drumazon.VSTi.v1.0.3.Incl.Keygen-AiR.rar. This file contains both the plugin file and the keygen file that you need to install and activate Drumazon on your computer. You can also check out the user manual and the video tutorials that are available on the website for more information and guidance.


Drumazon is a must-have plugin for any electronic music producer who wants to create authentic and powerful drum tracks with ease and flexibility. It is a faithful emulation of the Roland TR-909 drum machine that offers many additional features that make it more versatile and creative. It is compatible with any DAW that supports VST or AU formats and it works on both Windows and Mac OS X platforms. It is easy to use and fun to play with. It is one of the best drum machine plugins on the market today.


FAQs




Here are some frequently asked questions about Drumazon and their answers:



  • What are the system requirements for Drumazon?



Drumazon requires a computer with Windows XP SP2 or later or Mac OS X 10.6 or later, a CPU with SSE2 instruction set support (Intel Pentium 4 or AMD Athlon 64 or later), at least 512 MB of RAM, at least 100 MB of free disk space, a VST or AU compatible host application (DAW), and an internet connection for activation.


  • How much does Drumazon cost?



Drumazon costs 79 (approximately $90) for a single license that allows you to use it on up to three computers simultaneously. You can purchase it online using PayPal or credit card. You can also get it as part of the d16 SilverLine Collection bundle that includes 10 other plugins for 299 (approximately $340).


  • Can I try Drumazon before buying it?



Yes, you can download a free demo version of Drumazon from the official website or a trusted source. The demo version has all the features of the full version except that it generates noise every few seconds and it cannot be registered or activated.


  • How can I get support for Drumazon?



If you have any questions or issues regarding Drumazon, you can contact the d16 Group Audio Software support team via email at support@d16.pl or via their online contact form. You can also check out their online forum where you can find answers from other users and developers.


  • Where can I find more information about Drumazon?



You can find more information about Drumazon on the official website at https://d16.pl/drumazon, where you can also download the user manual and watch video tutorials. You can also follow d16 Group Audio Software on Facebook, Twitter, YouTube, Instagram, and SoundCloud for news and updates.


dcd2dc6462


Info

Ti diamo il benvenuto nel gruppo! Qui puoi entrare in contat...
bottom of page